Fixing supports |
||||
|
Single vibro absorber PHONOLYT® from 14 to 61 mm Reduces noise by 27 dB |
PHONOLYT® Anchor points for pipes from 31 to 216 mm Reduces noise by 27 dB |
PHONOLYT® Button anchor points from 14 to 61 mm Reduces noise by 30 dB |
||
Sliding supports |
||||
|
Pipe slides type TP-1 with one pipe clamp, T-section slide guide 80, 100 mm Diamater from 25 to 200 mm |
Pipe slides type TP-2 with two pipe clamps, T-section slide guide 80, 100 mm Diamater from 25 to 200 mm |
Pipe slides type LP-2 with two pipe clamps. For using with isolation up to 80mm Diamater from 175 to 600 mm |
Pipe slides type DS-2 with two pipe clamps. For using with isolation up to 140mm Diamater from 175 to 600 mm |
|
| Скользящие опоры |
||||
|
Guide rails М8, Max. recommended load [N]1 кN |
Guide rails М10, Max. recommended load [N]1 кN |
Slide guides М8,10,12 Max. recommended load 1,75 kN |
Slide guides М12,16 Max. recommended load 4 kN |
Box-section heavy slide guide М12,16 Max. recommended load 7,8 kN |
Fixing and sliding supports
Technical specifications
- Material: Material: Mainly steel S235 JR
- Coating: uncoated, galvanized minimum 20 microns., Hot zinc more than 45 microns., Stainless steel
Benefits
- Reliability and innovation
- High load carrying characteristics
- Ease and speed of installation
- Convenience of adjustment in small ranges both in time, and after installation.
Applications
- Designed for fixing pipes subject to temperature expansion
- Suitable for the installation of piping systems, hot water supply and cold water supply and heating
- Fastening is carried out both outside and indoors
- Sliding bearing is used to compensate for axial and radial forces and requiring significant movements.
Engineering services
- Development of design documentation for fixing engineering systems
- Staff training before installation
- Quality control of installation of structures based on the issued project