Roller bearings, pipe saddles, cryogenic clamp bases

Cylinder roller bearings type 51 08 19 to 51 35 19

• Surface: hot dip galvanized
• Load 8 to 35kN

Double taper roller bearings type 52 04 19 to 52 35 19

• Surface: hot dip galvanized
• Load 4 to 35kN

Double taper roller bearings (laterally movable) type 52 04 29 to 52 35 29

• Surface: hot dip galvanized
• Load 4 to 35kN

Double cylinder rollers bearing type 53 08 19 to 53 12 19

• Surface: hot dip galvanized
• Load 8 to 120kN

Weld-on pipe saddles type 54 06 19 to 54 81 19

• Surface: weldable primer
• Load 1,4 to 120kN
• Load at pipe temperature 150C

Pipe saddles with clamps type 54 06 29 to 54 81 29

• Surface: hot dip galvanized
• Load 1,4 to 120kN
• Load at pipe temperature 150C

Pipe saddles with clamps type 54 06 39 to 54 81 39

• Surface: hot dip galvanized
• Load 0,8 to 100kN
• Load at pipe temperature 150C

Lift-off restraints type 55 08 19 to 55 12 19

• for special pipe saddles type 54

Insulated pipe supports HIPAC type 56, 57

• They cover pipe sizes ranging from OD 21.3mm to OD 965.2mm
• insulation thicknessesfrom 25mm to 250mm
• temperature of medium as low as -196°C
• Insulation based on HD-PUF
• Color-coded densities 160kg/m.cub-yellow, 224kg/m.cub- red, 320kg/m.cub- green

Weld-on supports Type 57

• They cover pipe sizes ranging from OD 21.3mm to OD 660,4 mm
• Load at 80C from 1 to 20kN

Stanchions for horizontal pipes Type 58

• They cover pipe sizes ranging from OD 48,3 mm to OD 914,4 mm
• Stanchions hight 1000 to 1550 mm

Stanchions for short and long radius elbows type 58

• They cover pipe sizes ranging from OD 48,3 mm to OD 914,4 mm
• Stanchions hight 1000 to 1200 mm
• Materials: base plate S235JR, S355J2, stanchion P235GH

Surface: weldable primer

• maintenance of minimum rolling resistance (max. 4%)
• absorption of realistic lateral loading for double taper and double cylinder roller bearings (35% of the support load)
• for double cylinder roller bearings the whole support load can be borne by a single roller
• absorption of lateral displacement possible by laterally movable designs
• safe and simple design of lift-off restraints
• pipe saddles facilitate load transmission into the pipe walls
• pipe saddle design minimizes heat transmission
• galvanized corrosion protection for all roller bearings
• maintenance-free operation
• roller axle made of non-rusting steel
• teflon-bronze composite bushings
• wide range of support diameters (OD 60mm - OD 1350mm)
• high load capacity (max. support load 120kN)
• low installation heights (see selection table for ‘E’ dimensions)

• Used for fix  longer stretches  horizontal pipelines with big thermal expansion displacement.