Ball Head Anchors KKT
Technical specifications
Spherical head anchor 6000 Standard version/Columns, beams, slabs, walls, panels, pipes/ Element thickness, concrete compressive strength, reinforcement/ Load class 1,3 – 45,0 |
|
Spherical head eye anchor 6001/Prestressed beams, thin-wall elements, low concrete strength/ Element thickness, concrete compressive strength, reinforcemen /Load class 1,3 – 20,0 |
|
Offset spherical rod anchor 6052/ Thin sandwich panels/ Element thickness, concrete compressive strength, reinforcement/ Load class 2,5 – 15,0 |
|
Offset spherical head anchor 6002/ Sandwich panels / Element thickness, concrete compressive strength, reinforcement/ Load class 1,3 – 20,0 |
|
Spherical head plate anchor 6010 / Large thin slabs with high weight, prefab garages/ Element thickness, concrete compressive strength, reinforcement/ Load class 1,3 – 10,0 |
|
Sine-shaped anchor / Forged anchor made of reinforcement st 52-3. The load class is from 1.3 to 5.0 tons. Designed for narrow precast elements made of concrete, for example, walls. |
|
Narrow foot spherical head anchor 6000 D / Prestressed beams with minimal thickness / Element thickness, concrete compressive strength, reinforcement/ Load class 10,0 – 32,0 |
|
Universapny anchor / anchor combination with. The load range is from 1.3 to 5 tons. It is intended for additionally reinforced thin-walled slabs of low-strength concrete. |
|
Spherical head pitching anchor 6006/Thin panels that are lifted at 90° from the formwork/ Element thickness, concrete compressive strength, reinforcement / Load class 2,5 - 5 t |
|
DSM Quick fitting spherical head anchor 6073/Precast elements with restricted access anchor positions/ Element thickness, concrete compressive strength, reinforcement/ Load class 2,5 - 7,5 t |
|
Universal head lifting link 6102 /Lifting device for all types of DEHA KKT Spherical head lifting anchors in load classes 1,3 – 45,0 |
|
Forms fasteners, rubber, round, complete and without hairpin bots and / vehicle for fixing anchor with a ball head to the mold, and also to form a semicircular recess in the precast concrete / reinforced concrete elements with a large surface area. Load class 1.3 to 32 tons. |
|
Forms fasteners, rubber, round with a magnet. For fixing the transport anchor with ball head to the formwork, as well as for the formation of a semi-circular recess in prefabricated concrete / reinforced concrete elements with a large surface area. Load range from 1.3 to 7.5 tons. |
Benefits
- Safe, quick, efficient
- Durable clutch is resistant to abrasion
- huge range of anchors and accessories for all types of precast elements
- 10 load classes from 1.3 to 45.0
- A DEHA Turning device is available for the easy transportation
- and installation of precast pipe units CE-marking
Applications
- The spherical head anchors are made from a special quality steel, and the anchor head is forged to fit exactly with the corresponding universal head link. A visible manufacturer’s mark is embossed on each anchor; this contains the product brand DEHA (DH), the length of the anchor in mm (e.g. 120) and the load class (e.g. 2.5). The universal head links The universal head link is inserted into the recess surrounding the cast-in anchor and inserted over the anchor head by hand. The link is thus connected to the anchor in just a matter of seconds and can now be pulled in all directions. To release, simply rotate the tongue piece for quick and easy removal of the lifting link.
Engineering services
- Based on the technical requirements of the customer, our engineers will calculate the appropriate element and provide the calculation of the loads in accordance with the standards.
- On the website is available software with which you can easily calculate the desired configuration of the HDB element.
- Our engineers will provide technical support and advise the customer’s specialists both before and during installation work.