UMA - Grout-In Anchors
Technical specifications
- Stand-off distance of 20-300 mm,
- Maximum load 4 kN as standard version
- Thikness: 2-3 mm
- Material: 1.4571/1.4404/14401(А4) or 1.4401 (А2)
Technical documentation
Benefits
- Statically calculated
- Fixing with cement-sand mortar
- Fixing a natural stone with a pin
- The same type of brackets are used in the horizontal and vertical seams
- Suitable for seismic regions
- It is used for high relative and high loads.
- Low cost due to manufacturing technology
- Material production elements in stainless steel, which gives high durability of structures
- Minimal damage to the insulation layer
Applications
- Fixing natural stone, granite, travertine, marble in concrete, especially in masonry
- *The bracket is installed in a hole drilled in advance and filled with cement mortar, aligned in these planes and fixed with wedges until the mortar is fully cured.
Engineering services
- Consulting services in the field of construction of facades from natural stone and sheet materials
- Development of design documentation for ventilation facades in accordance with building codes
- Technological support for the construction of facades
- Execution of technical solution drawings
- Aligning of technical solutions with parties involved in a construction process
- Execution of installation guide for system elements and cladding for a complete understanding of the technology and sequence of work
- Assurance of project documentation by partner design office